SIEMENS Programming Cable

Programming Cable used for SIEMENS LOGO!, S7-200,S7-300,S7-400,S7-1200,

Not made by Siemens. so quality and good cheap.

Display: List / Grid
Sort By:
CP5512,MPI/PPI/FWL/PROFIBUS-DP PCMCIA 32bit communication card for Siemens  S7-200/300/400 PLC, replace 6GK1551-2AA00
SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps~12Mbps.After switched o..
Based on 1 reviews.
USB/PPIM+:isolated S7-200 PLC adapter suport multi-master station replace 6ES7901-3DB30-0XA0
Optoelectronic isolated USB Siemens S7-200PLC multi-master station PPI programming cable,directly use the STEP7 MicroWIN software to communicate,no need to install driver,support PPI,multi-master station PPI and advanced PPI,support 187.5Kbps high speed communication,just the same as 6ES7 901-3DB30-0XA0,3 meters,wit..
Based on 6 reviews.
CP5611-A2,PROFIBUS DP / MPI / PPI  PCI communication card  for desktop,replace 6GK1561-1AA01
CP5611-A2 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA01, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps..
Based on 2 reviews.
PC/PPI:Siemens S7-200 PLC programming cable,replace 6ES7 901-3CB30-0XA0
New OEM Siemens S7-200 USB PPI PLC Programmer Cable   If you need isolated cable,pls choose PC/PPI+,you can click the following website for PC/PPI+:PC-PPI+ The quality is guaranteed.It's tested before shippment. RS232/PPI interface,programming cable for Siemens S7-200PLC ,3 meters,..
Based on 1 reviews.
PC Adapter CN:RS232 to PROFIBUS/MPI adapter
This adapter is compatible with Siemens PC Adapter and HMI adapter,fully support  RS232 port of PC and HMI to PROFIBUS/MPI communication, use the Siemens special protocol processing chip,it can be used for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. RS232-RS485-power supply a..
Based on 2 reviews.
PC/PPI+:RS232 to PPI optoelectronic isolated adapter for Siemens S7-200 PLC,replace 6ES7 901-3CB30-0XA0
New OEM Siemens S7-200 PC/PPI+ PLC Programmer Cable   If you need non- isolated cable,pls choose PC/PPI,you can click the following website for PC/PPI:PC-PPI, The quality is guaranteed.It's tested before shippment. optoelectronic isolated PC/PPI cable,support 10 bi..
Based on 1 reviews.