InstallationNon-flush
Sensing side diameterØ8mm
Sensing distance4mm
Hysteresis(distance)Max. 15% of sensing distance
Standard sensing target12×12×1mm(iron)
Response frequency800Hz
IndicatorOperation indicator (red LED)
Unit weight (packaged weight)≈ 43 g (≈ 63 g)
Power supply12 - 24 VDC(ripple P-P: ≤ 10 %), operating voltage: 10 - 30 VDC
Current specificationCurrent consumption: Max. 10mA
Control output≤ 200 mA
Residual voltageMax. 2V
Protection circuitSurge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Insulation resistance≥ 50 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute
Vibration1.0 mm amplitude at frequency of 10 to 55 Hzin each X, Y, Z direction for 2 hours
Shock500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Environment_Ambient temperature-25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation)
Environment_Ambient humidity35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structureIP67(IEC standard)
ConnectionCable type
Cable Standard/materialStandard type cable (black): polyvinyl chloride (PVC)
MaterialCase/Nut: nickel plated brass (DIA. of sensing side Ø 8 mm connector type case: SUS303), washer: nickel plated iron, sensing side: PBT