Embedded private switch series meet the requirements of mine intrinsic safety design, with strong anti-interference performance, power redundancy backup, high protection level, suitable for intrinsic safety power application, rich interface, high integration, greatly convenient for users to expand the network, with high flexibility and high efficiency, large capacity of data transmission ability, can adapt to the special industrial environment of the mine.
● Support two 1*9 Gigabit optical ports, single/multi-mode optional, SC/ST/FC interface optional
● Support 4 10/100/1000M adaptive electrical ports, MDI/MDI-X adaptive, support network port surge protection
● Compatible with most mining intrinsically safe power supply application requirements, fanless, low power consumption design
● DC9-24V wide voltage, -40～85℃ wide temperature, reliable EMC protection
| Product number | ESM206G-2GF-4GT |
| RJ45 Port | 4-port 10Base-T/100Base-TX/1000Base-T,With adaptive function, support MDI/MDI-X connection |
| Fiber port | 2-port 1000Base-FX |
| Optical port parameters | wavelength：1310nm/1550nm |
| connector type：SC/ST/FC optional | |
| Transmission distance：20～80Km optional（Single mode） <2Km（multi mode） | |
| Transmission rate：1.25Gbps | |
| power supply | DC9~24V(Secondary anti-reverse diode, dual thyristor protection, overcurrent slow start) |
| Power consumption | ≤3.5W(@12VDC(full loaded) |
| web standards | IEEE 802.3、IEEE 802.3u、IEEE 802.3x,etc. |
| exchange mode | store and forward |
| Backplane Bandwidth | 14Gbps |
cache size | 2Mbit |
| MAC address table | 2K |
| EMC | IEC61000-4-5(Surge), Level2 IEC61000-4-4(EFT), Level2 |
| Size | 80mm×66mm×14.7mm |
| Operating temperature | -40°C～+70°C |
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)