Display method4-digit 7-segment LED
Control methodON/OFF, P, PI, PD, PID
Input specificationThermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
Analog: 0-100mV, 0-5V, 1-5V, 0-10V
0-20mA, 4-20mA
Sampling cycle50ms
Control output 1Relay(250VAC~ 3A)
Option inputCT, Digital(DI-1/2)
Option outputAlarm 1/2
Power supply100-240VAC~ 50/60Hz
Protection structureIP65(front panel)
Display accuracy_RTD•At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, select the higher one) ±1-digit
•Out of room temperature:(PV ±0.5% or ±2℃, select the higher one) ±1-digit
Display accuracy_Thermocouple•At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, select the higher one) ±1-digit
•Out of room temperature:(PV ±0.5% or ±2℃, select the higher one) ±1-digit
Display accuracy_Analog•At room temperature(23℃±5℃): ±0.3% F.S. ±1-digit
•Out of range of room temperature: ±0.5℃% F.S. ±1-digit
Display accuracy_CT input±5% F.S. ±1-digit
Hysteresis(adjustable sensitivity)RTD/Thermocouples: 1 to 100℃/℉(0.1 to 100.0℃/℉) variable Analog: 1 to 100-digit
Proportional band0.1 to 999.9℃/℉(0.1 to 999.9%)
Integral time0 to 9999 sec
Derivative time0 to 9999 sec
Control periodRelay output, SSR drive output: 0.1 to 120.0 sec Current output or SSR drive output selectable: 1.0 to 120.0 sec
Manual reset0.0 to 100.0%
Environment_Ambient temperature-10 to 50℃, storage: -20 to 60℃
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
Insulation typeDouble insulation or reinforced insulation(mark: , dielectric strength between the measuring input part and the power part: 2kV)
WeightApprox. 211g(approx. 141g)